Shandong Chengshun Metal Materials Co., Ltd.
Complete Products, Sufficient Inventory, Support Factory Inspection
Get A Quote NowPRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
430 STAINLESS STEEL PLATE/SHEET
Grade 430 is a ferritic, straight chromium,non-hardenable grade, combining good corrosion resistance and formability characteristics with useful mechanical properties. Its ability to resist nitric acid attack permits its use in specific chemical applications but automotive trim, indoor panelling such as refrigeration cabinets and appliance components are its largest fields of application.This grade is only readily available in sheet and coil (up to 1.2mm thick), most commonly in BA or 2B finishes, or polished to No4. The BA finish sheet has a quite bright, reflective appearance.
VIEW MORE +
Grade 430 is a ferritic, straight chromium,non-hardenable grade, combining good corrosion resistance and formability characteristics with useful mechanical properties. Its ability to resist nitric acid attack permits its use in specific chemical applications but automotive trim, indoor panelling such as refrigeration cabinets and appliance components are its largest fields of application.This grade is only readily available in sheet and coil (up to 1.2mm thick), most commonly in BA or 2B finishes, or polished to No4. The BA finish sheet has a quite bright, reflective appearance.
VIEW MORE +
201 is a kind of stainless steel. 201 stainless steel generally refers to 201 stainless steel and acid resistant steel. 201 stainless steel refers to the steel that is resistant to the corrosion of weak media such as atmosphere, steam and water, while acid resistant steel refers to the steel that is resistant to the corrosion of chemical corrosive media such as acid, alkali and salt.This product is a high manganese and low nickel stainless steel with low nickel content and poor corrosion resistance. It is widely used in various tabletops, countertops, kitchenware, outdoor decoration engineering, urban decoration industry and low-grade household products.
VIEW MORE +
Grade 904L is a non-stabilised low carbon high alloy austenitic stainless steel. The addition of copper to this grade gives it greatly improved resistance to strong reducing acids,particularly sulphuric acid. It is also highly resistant to chloride attack - both pitting / crevice corrosion and stress corrosion cracking.This grade is non magnetic in all conditions and has excellent weldability and formability.The austenitic structure also gives this grade excellent toughness, even down to cryogenic temperatures.
VIEW MORE +
Grade 316 is the standard molybdenum-bearing austenitic grade, particularly higher resistance to pitting and crevice corrosion in chloride environments. It is readily brake or roll formed,welded, soldered and cut by both thermal and mechanical methods.The austenitic structure gives excellent toughness, even down to cryogenic temperatures.Grade 316L, the low carbon version of 316, is highly resistant to sensitisation (grain boundary carbide precipitation) and so is extensively used in heavy gauge welded components (about 5mm and over). Grade 316H, with its higher carbon content has some application at elevated temperatures, as does stabilised grade 316Ti.
VIEW MORE +
Grade 301 is a high work-hardening rate austenitic stainless steel. It can be supplied with a tensile strength of up to over 1300 MPa in strip and wire forms, to produce tempers in the range of 1/16 Hard to Full Hard. The controlled analysis of Grade 301 enables it to retain sufficient ductility in conditions up to 1/2 Hard conditions to be roll or brake formed into aircraft, architectural and particularly rail car structural components. However, 3/4 to Full Hard tempers should be used whenever high wear resistance and spring features are required in components of simple form designs.
VIEW MORE +
CONTACT US
Tel : +8619153115539
Email : sales@chengshunmetal.com
WhatsApp : +8619153115539
Add: 401-32, Floor 4, Building 3, Zhongrun Shijifeng, No. 12111, Jingshi Road, Lixia District, Jinan, Shandong
GET A FREE QUOTE
Copyright : Shandong Chengshun Metal Materials Co., Ltd.
We use optional cookies to improve your experience on our website, including through social media connections and to serve personalized advertising based on your online activity. If you reject optional cookies, we will only use cookies that are necessary to provide you with the service.
